TLR-510 Speed Controller, 10 Amps
Controllers are used in ventilation systems to turn on/off and control the speed of single-phase electric extractor fan motors.
The minimum fan speed can be set using a variable resistor on the controller board.
Start, stop, and control
The fan speed is controlled by the remote control.
Multiple fans can be controlled if the total current drawn does not exceed the maximum current allowed by the controller.
Voltage: 220-240 V
Rated current: 10 A
Operating mode: Rotary knob (control)
Switching contact: Yes
Protection: Fuse and built-in spare fuse
Protection against radio interference: Yes
Mounting: Surface (plaster)
Color: White
Protection rating: IP55
Dimensions
Height: 164 mm
Width: 96 mm
Depth: 85 mm